Grass Valley K2 System Guide v.7.2 - Manual (Page 30)

30 K2 System Guide 07 April 2010
Chapter 1 Product Description
Ports used by K2 services
The following ports are used by the applications and system tools of the K2 family of
products:
Port # Type of
connection Service name Description
20 TCP Can be
mpgsession.exe,
mxfsession.exe,
gxfsession.exe, or
ftpd.exe FTP
21 TCP ftpd.exe FTP data
161 UDP snmp.exe SNMP
162 UDP snmptrap.exe SNMP trap
3389 TCP Remote Desktop Used by SiteConfig.
3811 TCP Grass Valley
AppService Used by 3rd party applications to communicate
using AMP protocol
18262 TCP GV ProductFrame
Configuration Service,
ProductFrame
Discovery Agent
Service Used by SiteConfig.
18263 UDP ProductFrame
Discovery Agent
Service GV NetConfig Device Broadcast/Unicast
Protocol. Used by SiteConfig. Sent by
ControlPoint, received by Devices
18264 UDP ProductFrame
Discovery Agent
Service GV NetConfig Controller Protocol. Used by
SiteConfig. Sent by Devices, received by
ControlPoint
49168 HTTP Grass Valley
K2 Config K2 System Configuration application connection
between a control point PC and the K2 system
device configured. Both HTTP and TCP
connections are required. Most functions use the
HTTP connection, but a few functions that
require longer time periods use TCP.
49169 TCP
49170 HTTP Grass Valley
Transfer Queue Service Transfer Manager connection between source
system and destination system.
49171 TCP Grass Valley
AppService AppCenter connection for connection between
control point PC and K2 client/Solo.
49172 HTTP Grass Valley
Storage Utility Host Connection for Storage Utility between the
control point PC and the K2 system being
configured.