Grass Valley K2 (Summit 3G) 10Gv2 Storage Area Network Installation v.8.1 - Manual (Page 206)

• MPIO software installed.
• Control network IP address assigned
• Power on for all servers
K2 RAID chassis
• Fibre Channel cable(s) connected
• Ethernet cable(s) connected
• Power on
K2 RAID Expansion chassis (optional)
• Fibre channel cable(s) connected
• Power on
Related Topics
Installing Multi-Path I/O Software on page 232
Defining a new K2 SAN
If you import a SiteConfig system description file in which the SAN is defined, you do not need to
define a new SAN. You can skip this task and instead start by configuring the first K2 Media Server.
1. On the control point PC, open the K2Config application.
A login dialog box opens.
206 K2 SAN Installation and Service Manual 02 February 2012
Configuring and licensing the K2 SAN