Assign vtr devices to kalypso sources, Assign vtr, Devices to – Grass Valley Machine Control Interfaces V.12.0 User Manual
Page 74: Kalypso sources
Advertising
74
Kalypso Machine Control Interfaces Installation Instructions
Section 3 — VTR Interface
Assign VTR Devices to Kalypso Sources
1.
Touch the
Source Definition
category selection button at the bottom of the
screen. Select the Engineering source on the scrolling list, name the
source with the Engineering Name data pad, select the input
number(s), and enter any keying information.
2.
Touch the
Device
Source Type button. The Device datapad below
).
Figure 59. Source Definition Menu, Available Devices
Advertising