Grass Valley 1200 Installation - Manual (Page 129)

4-15
Software Installation or Upgrade
5. Return power to the control panel using the ON/OFF switch, and the
system begins loading the floppy driveÕs software disk.
6. Observe the Menu display. A series of messages appear before you
have to do anything else.
When the download is complete (after about 4 minutes), the screen
indicates the control panel download is done and instructs you to
install the Frame software diskette. Remove the first diskette from the
drive.
7. Place the second diskette with the Frame software (part labeled 153310)
into the disk drive. Once again turn OFF power to the control panel,
wait five seconds, and turn it back ON to start the download. When this
download is done, remove the second diskette.
8. This completes the software download procedure.
9. Open the control panel, turn the rotary switch to the ¯ (zero) position
for normal operation, and restart the control panel by using the ON/
OFF switch.