Grass Valley PRS 250 RAID Storage System - Manual (Page 32)

Chapter 2 Installation
2-14 RAID Instructions
Two-Channel Profile/Single-SP RAID
This configuration, see the following illustration, consists of a two-channel Profile
disk recorder (one Master Disk Recorder - MDR) connected to a single RAID chassis
with one SP.
1. Connect a SCSI-2 cable from the Profile MDR rear panel connector to the RAID
chassis SCSI A IN connector.
2. Connect a SCSI terminator plug to the RAID chassis SCSI A OUT connector.
0226-1
RAID Chassis
2-Channel Profile Disk Recorder
SCSI-2 Terminator
SCSI-2 Cable
J10