HEIDENHAIN ND 1300 VED and Crosshair Systems - Manual (Page 118)

98 QC-300 Series User’s Guide
Point constructed from two lines
The intersection point of the lines will
be constructed. The virtual intersec-
tion point will be calculated and shown
if the lines do not actually cross.
To construct a point from two lines:
1 Touch the Measure Point icon
2 Touch one desired line feature
3 Press the Enter key
4 Touch the other line feature
5 Press the Enter key
6 Press the Finish key
The intersection point or virtual intersection point of the lines will be constructed.
Points constructed from a distance
The start and end points of the distance
will be constructed.
To construct points from a distance:
1 Touch the Measure Point icon
2 Touch the distance feature
3 Press the Enter key
4 Press the Finish key
The start point of the line will be constructed. The alternative end point construction can be selected from
the drop-down menu in the DRO window.