HEIDENHAIN ND 1300 VED and Crosshair Systems User Manual
Page 39
19
3
User Interface
NOTES
Archived image data only includes the X, Y or Z position of the image.
Touching an icon for an inappropriate data type produces no result. For example,
touching the diameter icon when a circle feature is selected in the feature list sends
diameter data to the serial port, however, touching the angle icon when a circle is selected produces
no result.
The Extra tab is typically used to send abbreviated data to the serial port since complete reports or screens
of data can be sent using the Print function described in Chapter 10: Setup for the Print screen settings.
However, a complete data set can be sent for a feature by touching the required series of icons in succes-
sion.
The transmission of data to the serial port from the Extra tab can be included in programs, like any other
measurement, tolerancing or reporting activity.
The complete data set for the selected circle is sent to a computer by touching each data icon in succession
Sending Data from the Extra Tab