Qc-300 series user’s guide – HEIDENHAIN ND 1300 VED and Crosshair Systems User Manual
Page 150
130
QC-300 Series User’s Guide
Distances constructed from a line and a circle
Up to three distance constructions can be made from a line and a circle:
• Center distance:
The perpendicular distance from the line to the center of the circle
• Min distance:
The perpendicular distance from the line to the nearest point of the circle
• Max distance:
The perpendicular distance from the line to the farthest point of the circle
Distances from virtual line extensions will be shown if the line is not long.
To construct a distance between a line and a circle:
1 Touch the Measure Distance icon
2 Touch the line feature
3 Press the Enter key
4 Touch the circle feature
5 Press the Enter key
6 Press the Finish key
The center distance will be constructed. Alternative distance constructions can be selected from the drop-
down menu in the DRO window.
Center distance
Min distance
Max distance