Linear slot on lateral surface g311-geo, Circular slot on lateral surface g312/g313-geo, 8 lat er al surf ace cont ours – HEIDENHAIN SW 54843x-02 DIN Programming User Manual
Page 234
234
DIN programming
4.8 Lat
er
al surf
ace cont
ours
Linear slot on lateral surface G311-Geo
G311 defines a linear slot in a lateral-surface contour.
Circular slot on lateral surface G312/G313-Geo
G312/G313 defines a circular slot in a lateral-surface contour.
G312: Circular slot clockwise
G313: Circular slot counterclockwise
Parameters
Z
Center (Z position)
CY
Center as linear value; reference: unrolled reference diameter
C
Center (angle)
A
Angle to Z axis (default: 0°)
K
Slot length
B
Slot width
P
Pocket depth (default: "P" from G308)
Parameters
Z
Center
CY
Center as linear value; reference: unrolled reference diameter
C
Center (angle)
R
Radius; reference: center point path of the slot
A
Starting angle; reference: Z axis (default: 0°)
W
End angle; reference: Z axis
B
Slot width
P
Pocket depth (default: "P" from G308)