eMachines Flat Panel Monitor - Manual (Page 17)

www.emachines.com
13
Adjusting monitor settings
Use the monitor controls (located on the monitor itself) and computer controls (accessible through
Windows) to adjust the display image. For more information about computer controls,
see
“Changing Windows screen settings” on page 16 .
Using the eTouch menu buttons
This monitor features the eMenu on-screen display (OSD) and eTouch menu buttons that let you
adjust contrast, brightness, and other settings for the monitor. The monitor saves changes you
make to the settings, even if you turn off the monitor.
Your monitor has two levels of menus, and the functionality of the touch buttons depends on the
menu that is currently open:
• The shortcut menu lets you quickly change some of the most commonly accessed settings.
• The main menu lets you precisely adjust all available settings.
Using the shortcut menu
To use the shortcut menu:
1 Touch the (Menu) button on the front of your monitor. The rest of the button icons appear,
and the shortcut menu opens.
Tip
To view a product tour of your monitor, press and hold the (Menu) button
for three seconds.
Important
The buttons are very sensitive, and may be “pressed” by holding your finger
just above its surface. To completely “release” a touch button, make sure that you
lift your finger well away from the button.
Information
Auto
Source
Cancel
Main Menu
8512327.book Page 13 Thursday, May 10, 2007 3:45 PM