Unpacking the monitor, Monitor (with neck attached), Base – eMachines Flat Panel Monitor User Manual
Page 6: This user guide, Vga cable, Connecting the monitor, Attaching the base, To attach the base, 1 slide the monitor’s neck onto the base, Unpacking the monitor connecting the monitor
Advertising
Using Your eMachines Flat-Panel Monitor
2
Unpacking the monitor
Your monitor box should contain the following items:
•
Monitor (with neck attached)
•
Base
•
This User Guide
•
VGA cable
•
Power cord
If you are missing any items, call Customer Care. For telephone numbers, see the label on the back
of your monitor.
Connecting the monitor
To set up the monitor, first attach the base, then make your cable connections.
Attaching the base
To attach the base:
1
Slide the monitor’s neck onto the base.
2
Place the monitor face-down on a stable, soft (non-marring) surface. A non-slip mat on a
tabletop is ideal. Let the monitor neck hang down over the edge of the table.
8512327.book Page 2 Thursday, May 10, 2007 3:45 PM
Advertising