eMachines Flat Panel Monitor - Manual (Page 8)

Using Your eMachines Flat-Panel Monitor
4
Connect the blue VGA video cable to the blue VGA video connector under the back of
the display.
3 Make sure that your computer is turned off, then connect the other end of the video cable
to the matching video port on the back of your computer.
Connecting power
To connect power:
1 Position your monitor so you can reach the back, then connect the power cord to the power
connector under the back of the monitor.
2 Plug the power cord into a correctly grounded power outlet. We recommend using a surge
protector to protect your monitor from voltage spikes.
8512327.book Page 4 Thursday, May 10, 2007 3:45 PM