eMachines Flat Panel Monitor - Manual (Page 9)

www.emachines.com
5
Connecting a security cable
You can secure your monitor to your computer desk (or to another heavy object) with a cable lock
(such as a Kensington™ lock). To connect a cable lock, follow the cable lock’s instructions to connect
it to the lock slot on the back of your monitor (cable lock not included).
Setting up the optional stand
Attaching the USB stand
In the United States, you can buy an adjustable USB stand from www.gateway.com . The stand can
be adjusted for height, tilt, and screen rotation. When the stand is connected to your computer’s
USB port, you can connect up to four USB devices to the USB 2.0 ports on the stand.
To attach the adjustable stand:
1 Make sure that the monitor is turned off.
2 Place the monitor face-down on a stable, soft (non-marring) surface. A non-slip mat on a
tabletop is ideal. Let the monitor base hang down over the edge of the table.
3 Remove the two screws from the neck hinge, then remove the neck from the LCD panel. Save
the screws.
Cable lock slot
Screws
8512327.book Page 5 Thursday, May 10, 2007 3:45 PM