HEIDENHAIN TNC 620 (81760x-02) ISO programming - Manual (Page 375)

Defining DIN/ISO functions 11.3
11
TNC 620 | User's ManualDIN/ISO Programming | 2/2015
375
11.3 Defining DIN/ISO functions
Overview
If a USB keyboard is connected, you can also enter
the DIN/ISO functions by using the USB keyboard.
The TNC provides soft keys with the following functions for
creating DIN/ISO programs:
Function Soft key
Select DIN/ISO functions
Feed rate
Tool movements, cycles and program
functions
X coordinate of the circle center/pole
Y coordinate of the circle center/pole
Label call for subprogram and program section
repeat
Miscellaneous function
Block number
Tool call
Polar coordinate angle
Z coordinate of the circle center/pole
Polar coordinate radius
Spindle speed