HEIDENHAIN TNC 620 (81760x-02) ISO programming - Manual (Page 496)

Positioning with Manual Data Input
15.1 Programming and executing simple machining operations
15
496
TNC 620 | User's ManualDIN/ISO Programming | 2/2015
15.1 Programming and executing simple
machining operations
The Positioning with Manual Data Input mode of operation is
particularly convenient for simple machining operations or to
pre-position the tool. It enables you to write a short program in
HEIDENHAIN conversational programming or in ISO format, and
execute it immediately. You can also call TNC cycles. The program
is stored in the file $MDI. In the
Positioning with MDI mode of
operation, the additional status display can also be activated.
Positioning with manual data input (MDI)
Limitation
The following functions are not available in the
Positioning with MDI operating mode:
FK free contour programming
Program section repeats
Subprogramming
Path compensations RL and RR
The programming graphics
Program call
%
The program-run graphics
Select the Positioning with MDI mode of
operation. Program the file $MDI as you wish
To start program run, press the machine START
button.