JBL Synthesis SDA 4600 - Manual (Page 9)

9 | J B L S y n t h e s i s S D A 8 3 0 0 / S D A 4 6 0 0 S y s t e m G u i d e
SDA4600 (BRIDGED #1)
SDA4600 (BRIDGED #2)
SDA4600 (BRIDGED)
CONFIGURATION 2 AMP CHANNEL
SUB 1 1 + [POSITIVE]
2 + [NEGATIVE]
SUB 2 3 + [POSITIVE]
4 + [NEGATIVE]
SDA4600 (BRIDGED)
CONFIGURATION 3 AMP CHANNEL
SUB 3 1 + [POSITIVE]
2 + [NEGATIVE]
SUB 4 3 + [POSITIVE]
4 + [NEGATIVE]
Configuration 3
Configuration 3 is selected by inserting the RJ25 plug with the label
“CONFIGURATION 3” into the rear panel “GPIO”.
Configuration 2
Configuration 2 is selected by inserting the RJ25 plug with the label
“CONFIGURATION 2” into the rear panel “GPIO”.
Step Five (Continued) – Configuration and
Identification
SDA4600 BRIDGED 2 x 1200 Watts per channel
Configuration 2 and/or Configuration 3 is used with high power subwoofers.
Connect the Channel 1 + as speaker positive and Channel 2 + as speaker
negative.
Use with these subwoofers:
Any passive subwoofer with a power handling of 600 – 1200 Watts
S2S-EX
S1S-EX
5 Co
n
fig
u
ratio
n
2
Co
n
fig
u
ratio
n
3