EverFocus DVR EDR810M - Manual (Page 109)

Connection Procedure:

The First step is to purchase or make a straight through cable. We recommend purchasing
one if you have never made a straight through cable. Please remember you can not use a
cross over network cable for this application

Once you have a straight through cable plug one end into the LAN port on the back of the
recorder and the other into the router.

Now Log into the EverFocus DVR menu and using the jog dial from the previous chapter go
to the Network Setting Menu.

If you have a Linksys Router:
 Assign an IP address of 192.168.001.050 to the DVR, a Subnet mask of
255.255.255.000, and a default gateway of 192.168.001.001.
If you have a D-Link Router:
 Assign an IP address of 192.168.000.050 to the DVR, a Subnet mask of
255.255.255.000, and a default gateway of 192.168.000.001.
If you have a pre-existing LAN:
 Go to a Computer on the pre-existing network and do the following:
o Go to Start, then Run and type cmd and click on OK.
 Then hit enter, type ipconfig and press enter this will give you the information you will
need.