EverFocus DVR EDR810M - Manual (Page 92)

7. Call Overview
This chapter will give you basic details on how to setup the CALL MENU on the DVR. Press the
CALL key and the CALL MENU will pop up as below.
Diagram 7.1
In CALL MENU, you can change the following settings for the call monitor:
1. SEQ: Sequence display on the call monitor. Press SEQ key to switch the sequence status
“ON” or “OFF”.
2. OSD: Channel name display on the call monitor. Press DISPLAY key to switch the OSD
status “ON” or “OFF”.
3. CAMERA: The current display camera in the call monitor. Press Channel NO to set display
camera.
4. QUAD DISPLAY
YES (CAMERA: 01~04): select YES to enable quad display of call monitor. For 8 CH model
DVR, press CH 2 button to show camera 05~08 in quad display.
NO: Select NO to disable quad display of call monitor.
Chapter
7