EverFocus DVR EDR810M - Manual (Page 45)

10. ALARM NETWORK:
YES: Enable alarm network.
NO: Disable alarm network.
11. MAIN MON: Display on a main monitor when an alarm occurs.
NO CHANGE: No change on the display in the main monitor when an alarm occurs.
FULLSCREEN: A full screen of the active camera will display when an alarm occurs.
12. CALL MON: Display on a call monitor when an alarm occurs.
NO CHANGE: No change on the display in the main monitor when an alarm occurs.
CAMERA 1~8: Display the active camera in full screen mode to the call monitor.
13. SUMMARY: Dial Jog to change items in the SUMMARY table. All alarm’s statuses are shown
in SUMMARY tables. These tables are for checking alarm overall statuses, but not for changing
them.
Note: Please check APPENDIX B to see other available alarm input / output functions.