EverFocus DVR EDR810M - Manual (Page 57)

3.7.5 WIRELESS
In the WIRELESS of the NETWORK SETUP MENU, we define:
Diagram 3.14
1. DHCP: Enable or disable the Dynamic Host Communication Protocol.
YES: Enable DHCP service.
NO: Disable DHCP service.
2. IP ADDRESS: Assign an IP address for this unit, for example: 192.168.010.200
When DHCP is YES, the DHCP server will assign this value automatically.
3. SUBNET MASK: Assign a subnet mask of the network for this unit, for example:
255.255.255.0. When DHCP is YES, the DHCP server will assign this value automatically.
4. GATEWAY: Assign a default gateway for this unit, for example: 192.168.010.001
When DHCP is YES, the DHCP server will assign this value automatically.
5. DNS SERVER: Assign a DNS server for this unit, for example: 168.195.001.001
When DHCP is YES, the DHCP server will assign this value automatically.
6. MODE: STA stands for Station (cannot be changed)
7. AUTHENTIFICATION:
Select from OPEN/NONE, OPEN/WEP, SHARED/NONE, SHARED/WEP or
WPAPSK/TKIP.
Open: no need of shared key.