EverFocus DVR EDR810M User Manual
Page 37
3
3
.
.
2
2
C
C
a
a
m
m
e
e
r
r
a
a
S
S
e
e
t
t
u
u
p
p
M
M
e
e
n
n
u
u
Diagram 3.4
Diagram 3.4 is a screen shot of the CAMERA SETUP MENU. This menu will walk you through
setting up the Camera Recording Speeds, Camera Titles, PTZ ID, covert modes, and recording quality.
In the CAMERA SETUP MENU the following fields are defined as:
1. TITLE: The title setting allows you to assign a title to each camera input. Each channel supports a
title with up to 12 characters. Press Enter to move to each character and use the Jog Dial to change
the value. The available alphanumeric characters are:
0,1,2,3,4,5,6,7,8,9,
A,B,C,D,E,F,G,H,I,J,K,L,M,N,O,P,Q,R,S,T,U,V,W,X,Y,Z,
( ) . , + - / and an empty space.
2. PTZ ID: Select PTZ ID/Address from 001~255 or OFF. OFF is the same as 000. The default value
is 10+N where N is camera’s number. This ID must be the same as the ID used in PTZ Dip Switch.
To change this, simply use the Jog Dial on the DVR.
3. INSTALL/COVERT: Select “ON” to enable a camera, and “OFF” to disable it. All recording
must be stopped before making changes to INSTALL. To take full advantage of the DVR’s
recording ability, switch any unused Camera Ports to OFF in this section. For COVERT, select
“ON” to cover a camera, and disable the screen in live mode. However, the image is still recorded,
and can be played back by any user that has playback right. The covert channels will not show up
in the sequence mode. To make changes, simply use the Jog Dial on the DVR.