Epson BALUNS FG01281 - Manual (Page 17)

Setting Up the Document Camera 17
Connecting the RGB Video Cable
Before you start, make sure your document camera and projector or
computer monitor are turned off.
1. Connect one end of the RGB video cable to the document
camera’s RGB OUT port.
2. Connect the other end to the RGB video input port on the
projector or computer monitor.
3. Tighten the screws on the connectors.
Connecting the RCA Cable
Before you start, make sure your document camera and projector or
TV are turned off.
1. Connect one end of the RCA cable to the document camera’s
VIDEO OUTPUT port.
2. Connect the other end to the RCA input port on the projector
or TV.
note
The RGB video input port on
the projector or monitor may
be labeled “computer,” or
“video in.”
or
Projector
Monitor
RGB OUT port
or
Projector
TV VIDEO OUTPUT port