Epson BALUNS FG01281 - Manual (Page 30)

30 Using the Document Camera
Using the Pointer
The pointer lets you direct attention to specific sections of your
presentation material. You can choose from two types of pointers in
four colors.
To display the pointer, connect the mouse that came with the
document camera to the
MOUSE port (see page 19) and press either
the left mouse button or the center wheel.
The mouse allows you to move the pointer as you would on a
computer. You can also do the following:
■ With the pointer displayed, click either the left mouse button or
the center wheel to see the on-screen display menu. Click again to
clear the menu. Click a third time to clear the pointer.
■ Click items on the on-screen display menu to activate them.
■ Click the right mouse button to double the size of the displayed
image.
For information on selecting different types of pointers, see page 31.
Adjusting Settings with the On-Screen
Display
The on-screen display allows access to many of the settings available
with the document camera’s remote control. To access the on-screen
display, you must have the mouse connected to the document
camera’s
MOUSE port (page 19). When you click either the left
mouse button or the center wheel, the on-screen display menu and
pointer appear (you may have to click twice).
Center
wheel
Left
mouse
button Right
mouse
button
note
The pointer feature only
works when the document
camera is in the
MAIN
display mode. It does not
work when the document
camera is in the
RGB1 or
RGB2 display modes.