Epson BALUNS FG01281 - Manual (Page 24)

24 Using the Document Camera
Switching Between Picture Sources
If you have an external video source connected to the document
camera, such as a laptop or desktop computer, you can switch between
the video source and the camera.
■ If you’ve connected a computer to the RGB1 INPUT port on the
document camera, press the RGB1 button on the remote control.
■ If you’ve connected another computer to the RGB2 INPUT port,
press the RGB2 button to access that source.
■ Press the Main button to switch back to the document camera.
Adjusting the Lighting
If you are presenting printed material or three-dimensional objects,
the two upper lamps provide ample light. If the ambient lighting in
the room is sufficient, however, you may obtain a better image with
the upper lamps off.
In addition, you may want to turn the upper lamps off and the base
lamp on if you’re projecting film or slides.
note
You can also press the RGB1 ,
RGB2 , and MAIN buttons
on the document camera to
switch to a different video
source.
PAUSE
LAMP POSI/NEGA COLOR/B&W
IRIS
AF
2x
SET
RGB1 RGB2
NORMAL OPEN CLOSE
PRESET CALL
TELE ZOOM
MAIN INPUT
WIDE NEAR FOCUS FAR
UPPER BASE
SET IMAGE CALL
Select the image
source