Epson BALUNS FG01281 - Manual (Page 34)

34 Using the Document Camera
Saving Settings and Images
You can save up to eight groups of document camera settings for later
use. That way, if you want to present the same type of materials (for
example, negative film), you can quickly recall your settings with a
simple push of a button.
You can also recall up to eight individual images captured by the
document camera.
Saving and Recalling Camera Settings
To save your settings, press the PRESET SET button on the remote
control, then press one of the numbered buttons between 1 and 8.
The message
PRESET x WRITE appears on the screen (where x is the
number assigned to the group).
To recall a group of saved settings, press the PRESET CALL button on
the remote control, then press the number of the group you want to
use. The message
MOVE x appears (where x is the number of the
group) and the appearance of the screen changes to show your
settings.
Saving and Recalling Images
To save a copy of the projected image, press IMAGE SET on the
remote control, then press one of the numbered buttons between 1
and 8. The message
MEMORY STATUS appears, followed by
IMAGE x WRITE , where x is the number assigned to the image.
To recall a saved image, press IMAGE CALL on the remote control,
then the number of the image you want to display. The saved image
appears on the screen.
note
Camera settings remain in
memory even when you turn
the document camera off.
However, saved images are
deleted when the camera is
turned off.
PAUSE
LAMP POSI/NEGA COLOR/B&W
IRIS
AF
2x
SET
RGB1 RGB2
NORMAL OPEN CLOSE
PRESET CALL
TELE ZOOM
MAIN INPUT
WIDE NEAR FOCUS FAR
UPPER BASE
SET IMAGE CALL
Press to save
and recall
images Press to save
and recall
settings
Assign a number to saved
settings and images