Epson BALUNS FG01281 - Manual (Page 47)

Solving Problems 47
Solving Problems with the
Remote Control
■ Make sure you are within 23 feet (7 m) of the document camera,
and within range of the document camera’s sensor (approximately
30° to the left or right and 15° above or below).
■ The remote control batteries may not be installed correctly or may
be low on power. Try changing the batteries as described on
page 13.
■ Dim the room lights and turn off any fluorescent lighting. Make
sure the document camera is not in direct sunlight. Strong
lighting, especially fluorescent lights, may affect the document
camera’s infrared receivers.
■ Turn off any nearby equipment that emits infrared energy, such
as a radiant room heater.
■ If the NORMAL button on the remote control does not return the
screen to the auto iris default setting, try pressing the
AUTO/MANUAL button on the document camera. When this
button’s indicator light is on, the document camera is locked in
manual mode and the remote control’s
NORMAL button has no
effect.