Epson BALUNS FG01281 - Manual (Page 54)

54 Notices
■ Do not block or cover openings in the base, or insert objects through the
slots. These openings are provided for ventilation to protect the
document camera from overheating. Never place the document camera
on a bed, sofa, rug, or similar surface. Do not place the document
camera in a built-in installation, such as a bookcase or rack, unless
proper ventilation is provided and the guidelines in this manual are
followed.
■ Place the document camera near a wall outlet where the plug can be
easily unplugged.
Placez l’appareil près d’une prise de courant où la fiche peut être débranchée
facilement.
■ Use only the type of power source indicated on the document camera
label.
■ Connect the document camera to a properly grounded power outlet.
Avoid using outlets on the same circuit as air control systems or other
high-load devices that regularly switch on and off.
■ If you use an extension cord with the document camera, make sure the
total ampere rating of the devices plugged into the extension cord does
not exceed the cord’s ampere rating. Also, make sure the total ampere
rating of all devices plugged into the wall outlet does not exceed the wall
outlet’s ampere rating. Overloading extension cords, power strips, or
wall outlets can result in fire or electric shock.
■ Follow the instructions in this manual to install batteries in the remote
control. Never expose batteries to heat or flame, and never mix old and
new batteries or batteries of different types. Do not use rechargeable
Ni-Cd batteries, and do not try to recharge or short-circuit the batteries.
Replace batteries as soon as they run out. If the batteries leak, wipe away
battery fluid with a soft cloth. If fluid gets on your hands, wash them
immediately. Dispose of used batteries according to local regulations.
■ This product may be equipped with either a polarized 2-wire AC line
plug (a plug having one blade wider than the other) or a 3-wire
grounding type plug (a plug having a third grounding pin). The 2-wire
polarized plug will fit into the power outlet only one way. This is a safety
feature. If you are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug still fails to fit, contact your electrician to
replace your obsolete outlet. Do not defeat the safety purpose of the
polarized plug. The 3-wire grounding type plug will fit into a grounding
type power outlet. This is a safety feature. If you are unable to insert the
plug into the outlet, contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the grounding type plug.