FujiFilm X100 - Manual (Page 100)

84
The Setup Menu
N N ISO AUTO CONTROL ISO AUTO CONTROL
Choose whether the camera automatically adjusts sensitivity if optimal exposure can not be achieved at current settings. Select-
ing
N ISO AUTO CONTROL displays the settings listed in the table below; press the command dial up or down to highlight a
setting and press the dial right to display options for the highlighted item, then highlight the desired option and press MENU/OK.
When ISO AUTO CONTROL is on, the upper limit for sensitivity is fi xed at the value selected for MAX. SENSITIVITY. The camera
will not exceed this limit even if underexposure would result.
Option Option Description Description Default Default
ISO AUTO CONTROL ISO AUTO CONTROL
If ON is selected, the camera will automatically adjust sensitivity if optimal exposure can not be
achieved at current settings.
ON ON
MAX. SENSITIVITY MAX. SENSITIVITY
Choose the upper limit for auto sensitivity from ISO 400, 800, 1600, and 3200 (the lower limit is fi xed
at ISO 200).
800 800
MIN. SHUTTER SPEED MIN. SHUTTER SPEED
When the shutter speed dial is rotated to A and ISO AUTO CONTROL is ON, the camera will adjust
sensitivity only as required to prevent shutter speed from being slower than this value.
1/60 SEC 1/60 SEC
R In shutter-priority AE and manual exposure modes, the camera will automatically adjust sensitivity if optimal exposure can
not be achieved at the shutter speed selected by the user.
R Sensitivity is automatically adjusted for optimal fl ash output when a fl ash is used.
R Shutter speed, aperture, and the current sensitivity are displayed when the shutter button is pressed halfway.
B B RED EYE REMOVAL RED EYE REMOVAL ((defaults to defaults to OFF) OFF)
Choose ON to remove red-eye eff ects caused by the fl ash.
R Red-eye reduction is performed only when a face is detected.
R Red-eye removal is not available with RAW images.