Basic setup, Date/time or, Choose a language – FujiFilm X100 User Manual
Page 33: Highlight a language and press menu/ok, Set the date and time
17
Fi
rs
t S
te
p
s
Basic Setup
Basic Setup
A language-selection dialog is displayed the fi rst time the camera is turned on. Set up the camera as
described below (you can reset the clock or change languages at any time using the
F
DATE/TIME
or
L
a
options in the setup menu; for information on displaying the setup menu, see page 80).
1
Choose a language.
START MENU
NO
SET
ENGLISH
DEUTSCH
FRANCAIS
Highlight a language and press MENU/OK.
R Press DISP/BACK to skip the current step. Any steps you skip will be displayed
the next time the camera is turned on.
2
Set the date and time.
NO
SET
2013
2012
2010
2009
1. 1 12 : 00
AM
2011
YY. MM. DD
DATE/TIME NOT SET
Press the command dial left or right to highlight the year, month, day,
hour, or minute and press up or down to change. To change the order
in which the year, month, and day are displayed, highlight the date
format and press the command dial up or down. Press MENU/OK to exit
to shooting mode when settings are complete.
R If the battery is removed for an extended period, the camera clock will be reset and the language-selection
dialog will be displayed when the camera is turned on.