FujiFilm X100 - Manual (Page 105)

89
Co
n
n
e
ct
io
n
s
Printing Pictures via USB Printing Pictures via USB
If the printer supports PictBridge, the camera can be connected directly to the printer and
pictures can be printed without fi rst being copied to a computer. Note that depending on the
printer, not all the functions described below may be supported.
Connecting the Camera Connecting the Camera
1 Connect the supplied USB cable as shown and
turn the printer on.
2 Turn the camera on and press a button.
t USB will be displayed in the monitor, fol-
lowed by the PictBridge display shown below
at right.
USB
00
OK SET
FRAME
SHEETS
PICTBRIDGE
TOTAL: 00000
Printing Selected Pictures Printing Selected Pictures
1 Press the command dial left or right
to display a picture you wish to print.
R To print one copy of the current picture, pro-
ceed directly to Step 3.
2 Press the command dial up or down
to choose the number of copies (up
to 99). Repeat steps 1–2 to select
additional pictures.
3 Press MENU/OK to display a confi rma-
tion dialog.
CANCEL YES
PRINT THESE FRAMES
TOTAL: 9 SHEETS
4 Press MENU/OK to start printing.