Epson Expression 1680 - Manual (Page 106)

Using Optional Equipment
99
Using the Film Guides
You can use the four film guides that came with the scanner to scan 35 mm slides,
strips of 35 mm negative or positive film, 120-size or 220-size format film, and
4
× 5-inch film.
When using the film guides, be sure the transparency unit is completely
closed or an error will occur and you will be unable to scan.
Store the reflective document mat in the transparency unit pocket when
not in use.
Loading 35 mm film
Follow these steps to load 35 mm positive or
negative film:
1. Place the 35 mm filmstrip guide on a flat
surface and remove the cover from one of
the strip holders.
2. Insert a filmstrip in the holder face
down, and then replace the cover.
The glossy (smooth) side of the film
should be facing down, and the film
emulsion layer should be facing up.
3. Repeat steps 1 and 2 for all the film
strips you scan.
L400 16
1680.book Page 99 Thursday, March 1, 2001 4:28 PM