Epson Expression 1680 - Manual (Page 144)

Installing the TCP/IP Protocol
137
4. Make sure that Obtain an IP address
automatically is selected and click OK .
(If you need to manually assign an IP
address, contact your Network
Administrator.)
5. Click OK to close the Local Area
Connection Properties screen.
6. Click Close to close the Local Area
Connection screen.
Installing the TCP/IP Protocol on
Windows 95 and Windows 98
1. Open the Control Panel and double-click
the Network icon. If necessary, click the
Configuration tab to display the window
on the right.
2. Check that TCP/IP appears in the list of
installed network components.
If it appears in the list, go to “Assigning an
IP Address for Windows 95 and Windows
98 (First Release)” on page 138.
If you don’t see TCP/IP in the list,
continue with the next step.
1680.book Page 137 Thursday, March 1, 2001 4:28 PM