Epson Expression 1680 User Manual
Page 113
Advertising
106
Using Optional Equipment
5. Insert the two installation
screws that came with the
automatic document feeder into
the screw holes, then tighten the
screws with a coin.
6. Remove the protective foam
block from the automatic
document feeder’s mounting
hardware, and then gently close
the automatic document feeder.
7. Attach the ADF’s connector to
the scanner’s
OPTION
interface.
Secure the connection by
tightening the connector screws.
8. Close the ADF.
If you haven’t connected the scanner to your computer, continue with “Connecting
the Scanner to Your Computer” on page 17.
Remove the foam block
after tightening the
installation screws.
1680.book Page 106 Thursday, March 1, 2001 4:28 PM
Advertising