Epson Expression 1680 - Manual (Page 110)

Using Optional Equipment
103
Scanning Reflective Documents
To scan reflective documents with the transparency unit installed, insert the reflective
document mat included with the transparency unit.
1. Open the transparency unit. If there’s a film guide on the document table, remove
it.
2. Slide the mat into place and insert the
tabs into the slots on the transparency
unit.
3. Place your document face down on the
document table and close the
transparency unit.
4. Scan your document.
To remove the reflective document
mat, slide it up and out of the slots on
the transparency unit.
1680.book Page 103 Thursday, March 1, 2001 4:28 PM