Epson Expression 1680 - Manual (Page 147)

140
Installing the TCP/IP Protocol
Installing the TCP/IP Protocol on
Windows NT 4.0
1. Open the Control Panel and
double-click the Network icon. If
necessary, click the Protocols tab.
2. Check that TCP/IP Protocol appears in
the list of network protocols.
If it appears in the list, go to “Assigning
an IP Address on Windows NT 4.0” on
page 141.
If you don’t see TCP/IP Protocol in the
list, continue with the next step.
3. Click the Add button. You see the
screen to the right.
4. Select TCP/IP Protocol and click OK .
5. Continue with the instructions in the
next section to assign an IP address.
1680.book Page 140 Thursday, March 1, 2001 4:28 PM