Edimax Technology EDIMAX FAST ETHERNET MFP SERVER VERSION: 2.0 - Manual (Page 102)

96
8. To print a test page and apply all the settings, please click “Yes”.
9. If the test page is printed without problem, please click “Yes”. If it is failed
to print, please click “No” to go back to “Printer configuration - fedora”
screen and configure again.
13.2 Console Mode
To configure the MFP Server for LPD printing, perform the procedures below:
1. Enable MFP Server’s TCP/IP Support.
2. Set up MFP Server’s IP address.
3. Verify MFP Server’s IP Address.
4. Configure remote LPD printing on the host.
5. Print a test page.
In the next sections, we will describe these five procedures step by step.