Edimax Technology EDIMAX FAST ETHERNET MFP SERVER VERSION: 2.0 - Manual (Page 29)

23
5.1 Printing
The MFP will be added to “Printers and Faxes” in the Windows after the MFP
is installed. When you connect to the MFP by clicking “Connect” in the “MFP
Manager”, the MFP Server will create the connection between the MFP and
your computer and then you can print a document just follows the same steps
as usual.
Tip: If you have sent a printing job to the MFP while the MFP is connecting
by a user, you may be prompted that the device is not found or the document
is failed to print. Please resend the printing job after the MFP is idle or not
being connected by the other user.