Edimax Technology EDIMAX FAST ETHERNET MFP SERVER VERSION: 2.0 - Manual (Page 93)

87
12.3 Network Port Setup
“Network Port Setup” Utility offers a very simple method to add or remove
MFP Server’s printer port from the client’s computer.
During the MFP Server’s installation procedure, the system will automatically
search for all MFP Servers on the network, and add the printer port of the
MFP Server you have selected to user’s computer (see below).
If you install another new MFP Server in the network, you must run this
program first. This program will search for new MFP Servers and allow you to
add the new network printer port into your computer conveniently. Perform the
standard Add Printer procedures. After you can print directly to the printer
through the newly installed MFP Server.
Note: Please be aware that Network Port Setup Utility can only detect and
configure all MFP Servers within the same network; it cannot search and
configure the MFP Servers on other subnets across network segments.