Edimax Technology EDIMAX FAST ETHERNET MFP SERVER VERSION: 2.0 - Manual (Page 63)

57
8.4.2 TCP/IP
You can configure the MFP Server to get IP automatically from DHCP server
or setup an static IP manually.
If you need the MFP Server to automatically get an IP from DHCP server,
select “Enable Obtain TCP/IP Settings Automatically (Use DHCP/ BOOTP)”.
You also can select “Disable Use the following TCP/IP Settings” to manually
assign “IP Address”, “Subnet Mask” and “Gateway” for the MFP Server.