Extron electronic MVX 88 Series - Manual (Page 26)

Operation, cont’d
MVX 44 / 48 / 84 / 88 VGA Matrix Switchers • Operation 3-8
PRELIMINAR
Y
3 . Press and release the Output 3, Output 4, and Output 8 buttons (figure 3-5).
N The entire set of ties can be canceled at this point by waiting for the 5-second
input/output button timeout to occur.
7 6 5 2 4 1 8 3
OUTPUTS
Press and release the Output 3, 4, and 8 buttons.
The LEDs blink to indicate that the selected input will be tied to these outputs.
= Blinking LED
Figure 3-5 — Select the outputs
4 . Press and release the Enter button (figure 3-6).
ENTER 3 4 8 5
INPUTS OUTPUTS
The selected input's and the selected outputs'
LEDs light steadily for approximately 1
second to indicate the tie and then go out. Press the Enter button to
confirm the configuration
change.
1 second
Figure 3-6 — Press the Enter button
The current configuration (figure 3-7) is now:
• Input 5 video and audio tied to output 3, output 4, and output 8
Input 5 (video/audio) tied
to outputs 3, 4, and 8.
Input
Output
3
4
8
5
Video
Audio
Figure 3-7 — Example 1 configuration