Extron electronic MVX 88 Series - Manual (Page 58)

Remote Operation, cont’d
MVX 44 / 48 / 84 / 88 VGA Matrix Switchers • Remote Operation 4-8
PRELIMINAR
Y
Command/response table for SIS commands (continued)
Command ASCII command
(host to switcher)
Response
(switcher to host)
Additional
description
Save, recall, and directly write global presets
Save current configuration
as a global preset X(,
Spr
X(] Command character is a
comma.
Example: 8 , Spr08
] Save current ties as preset 8.
Recall a global preset X(. Rpr X(] Command character is a
period.
Example: 5 . Rpr05
] Recall preset 5, which
becomes the current
configuration.
Directly write a global preset E
*
X(
P
X!
*
X@
!
X!
*
X@
%
X!
*
X@
$ ...
X!
*
X@
&
} Enter as many ties as are
valid for this model. The
tie all (!), both tie RGB (&
and %), and the tie audio ($)
commands are all valid.
Spr
X(]
Example: *16P08*5!07*04%3*6$3*8& Esc
Brackets are shown to separate
ties for clarity only. Create
global preset 16, which ties
video and audio input 8 to
output 5, RGBHV input 7
to output 4, audio input 3
to output 6, and RGBHV
input 3 to output 8.
Spr16
]
View global preset
configuration EX(
1VC
} X!
1 •
X!
2 •
X!
3 •...•
X!
n •Vid•
X!
1 •
X!
2 •
X!
3 •...•
X!
n •Aud
]
Show preset
X(
’s video and
audio configuration. Show
the video input tied to n
sequential outputs and then
the audio input tied to n
sequential outputs. n is the
highest output number for
this model switcher.
Response description: Video input # (I#) tied to output #1 (O#1)•I# tied to O#2•I# tied to O#3•I# tied to O#n•Vid•
Audio input # (I#) tied to output #1 (O#1)•I# tied to O#2•I# tied to O#3•I# tied to O#n•Aud
]
Example (MVX 88 VGA): E
4VC
}
1 Output:
Response = tied input:
Input 5 video tied to output 2
2 3 4 5 6 7 8 1 2 3 4
6•5•6•8•3•3•1•0•Vid•8•1•1•1•8•8•8•8•Aud
5 6 7 8
No tied input Audio input 8 tied to output 5
Each position shown in the response is an output: left = output 1 , right = output 8. The
number in each position is the input tied to that output.
Video — Input 6 is tied to outputs 1 and 3; input 5 to output 2; input 8 to output 4;
input 3 to outputs 5 and 6; and input 1 to output 7. No input is tied to output 8.
Audio — Input 8 is tied to outputs 1 and outputs 5 through 8; input 1 to outputs 2 through 4.
Example (MVX 44 VGA): E 4VC }
Output:
Response = tied input:
Input 1 tied to output 2
1•1•0•2•Vid•1•1•0•1•Aud
1 2 3 4 1 2 3 4
N
E 0VC } returns the switcher’s current video configuration.
N
X(
= Global preset # 00 - 16 (00 = current configuration)
X!
= Input number 0 – (maximum number of inputs for your model) (0 = untied)
X@
= Output number 1 – (maximum number of outputs for your model)