Extron electronic MVX 88 Series - Manual (Page 59)

4-9 MVX 44 / 48 / 84 / 88 VGA Matrix Switchers • Remote Operation
PRELIMINAR
Y
Command/response table for SIS commands (continued)
Command ASCII command
(host to switcher)
Response
(switcher to host)
Additional
description
View ties, gains, mutes, and presets
Read RGB (video) output
tie
X@
&
X!]
RGB input
X!
is tied to
output X@ .
— or —
Read RGB (video) output
tie
X@
%
X!]
RGB input
X!
is tied to
output
X@
.
Read audio output tie X@ $ X!] Audio input X! is tied to
output
X@
.
View input gain X$ G X^]
Example: 3G -06
] Audio input 3 level is -6 dB.
View output mutes E VM } X1) 1 X1) 2 ...
X1) n Mut
] Each X1) response is the
mute status of an output:
left = output 1, right =
output n.
n
= the highest output
number for this model..
Example ( MVX 84 VGA): E VM } 0132Mut ] Output 1 is unmuted, output 2
video is muted, output 3
video and audio are muted,
and output 4 audio is muted.
Outputs 5 through 8 are not
present on this switcher.
View global preset
configuration EX(
1VC
} X!
1 •
X!
2 •
X!
3 •...•
X!
n •Vid•
X!
1 •
X!
2 •
X!
3 •...•
X!
n •Aud
]
Show preset
X(
’s video and
audio configuration. Show
the video input tied to n
sequential outputs and then
the audio input tied to n
sequential outputs. n is the
highest output number for
this model switcher.
Response description: Video input # (I#) tied to output #1 (O#1)•I# tied to O#2•I# tied to O#3•I# tied to O#n•Vid•
Audio input # (I#) tied to output #1 (O#1)•I# tied to O#2•I# tied to O#3•I# tied to O#n•Aud
]
Example (MVX 88 VGA): E
4VC
}
1 Output:
Response = tied input:
Input 5 video tied to output 2
2 3 4 5 6 7 8 1 2 3 4
6•5•6•8•3•3•1•0•Vid•8•1•1•1•8•8•8•8•Aud
5 6 7 8
No tied input Audio input 8 tied to output 5
Each position shown in the response is an output: left = output 1 , right = output 8. The
number in each position is the input tied to that output.
Video — Input 6 is tied to outputs 1 and 3; input 5 to output 2; input 8 to output 4;
input 3 to outputs 5 and 6; and input 1 to output 7. No input is tied to output 8.
Audio — Input 8 is tied to outputs 1 and outputs 5 through 8; input 1 to outputs 2 through 4.
N
E
0VC
}
returns the switcher’s current video configuration.
N
X@
= Output number 1 – (maximum number of outputs for your model)
X!
= Input number 0 – (maximum number of inputs for your model) (0 = untied)
X$
= Input number 1 – (maximum number of inputs for your model)
X^
= Numeric dB value –18 to +24 (45 steps of gain or attenuation) (Default = 0 dB)
X1)
= Video/audio mute 0 = no mutes 2 = audio mute
1 = RGB mute 3 = RGB and audio mute
X(
= Global preset # 00 - 16 (00 = current configuration)