Extron electronic MVX 88 Series - Manual (Page 66)

Remote Operation, cont’d
MVX 44 / 48 / 84 / 88 VGA Matrix Switchers • Remote Operation 4-16
PRELIMINAR
Y
6. To create a tie, drag an input box to one or more output boxes. If the Take
button is not grayed out, click the Take button.
7 . To remove a single tie, drag the output box to its tied input box or to the trash
can. To remove a set of ties, drag the input box to the trash can.
Updating the firmware
The firmware upgrade utility provides a way to replace the firmware that is coded
on the switcher’s control board without taking the switcher out of service, opening
the switcher enclosure, and replacing the firmware chip.
N Upgrading the firmware does not overwrite the current configuration, presets,
or the audio settings.
Update the switcher firmware as follows:
1 . Visit the Extron web site, www.extron.com, select the MVX switcher product
category, select the latest firmware file for download, and copy it to your
computer. Note the folder to which you save the firmware file.
2 . Start the Matrix Switchers Control Program and connect to the MVX switcher.
See “Using the software” in this chapter, steps 1 through 3, starting on
page 4-14.
3 . Click Tools > Update firmware. The Extron Firmware Loader appears
(figure 4-11).
a
. Click Upload. The Firmware Update window appears.
b . Click OK. The open file window appears.
Figure 4-11 — Open window