Extron electronic MVX 88 Series - Manual (Page 72)

Remote Operation, cont’d
MVX 44 / 48 / 84 / 88 VGA Matrix Switchers • Remote Operation 4-22
PRELIMINAR
Y
Master-Reset selection
Master-Reset clears all ties and presets, clears all video and audio mutes,
sets all input audio gain to unity gain (+0 dB), and sets all output levels to the
factory default (professional level, +4 dBu).
Using Emulation mode
Emulation mode allows you to set up the software without attaching the switcher
to the computer. To use Emulation mode, do the following:
1. Click Start > Programs > Extron Electronics > Matrix Switchers > MATRIX
Switcher + Control Pgm
.
2. Choose Emulate, and click OK.
3. Choose an emulation file to open, and click OK. The file DEMO.MTX provides
a sample of a completed matrix setup. The file NEW.INI provides a blank
setup to get you started.
4. Enter the file name under which you want to save any changes to the file, and
click OK.
5. Select 1, 2, or 3 as the number of video boards, 1 or 2 as the number
of audio boards, and MVX Series as the matrix model for which you are
preparing a configuration; and click OK (figure 4-17).
Figure 4-17 — Emulation mode configuration
6. Continue using the program as described in steps 3 through 7, beginning on
page 4-14.