Emerson 1F92 - Manual (Page 28)

26
PROGRAMMING
MANUAL OPERATION MANUAL OPERATION MANUAL OPERATION MANUAL OPERATION MANUAL OPERATION
Your Comfort-Set 90 thermostat can
be used to control temperature
manually (without programming).
For manual operation, press
SYSTEM
to select HEAT HEAT HEAT HEAT HEAT or COOL COOL COOL COOL COOL, then
press PROGRAM HOLD . Use
or to set the tempera-
ture as desired.
PROGRAMMED OPERATION PROGRAMMED OPERATION PROGRAMMED OPERATION PROGRAMMED OPERATION PROGRAMMED OPERATION
Planning Your Program
Planning Your Program Planning Your Program Planning Your Program Planning Your Program
The sample schedule (page 28)
shows the factory installed programs
for heating and cooling. The heating
and cooling programs are separate,
and must be programmed individu-
ally. To use the factory program, set
the clock and press PROGRAM
RUN with the thermostat SYSTEM
set to Heat Heat Heat Heat Heat, Cool Cool Cool Cool Cool, or Auto Auto Auto Auto Auto.
Fill out the blank schedule (page 29)
with the time and temperatures you
want in your program. Fill in every
space for your program.
The same temperature can be
repeated more than once if you do
not want the temperature to change
over several time periods.
Entering Your Program Entering Your Program Entering Your Program Entering Your Program Entering Your Program
To Set the Clock To Set the Clock To Set the Clock To Set the Clock To Set the Clock:
1. Press PROGRAM RUN .
2. Press SET TIME . The display
will show the hour. Use TIME
FWD or TIME BACK to set to the
current hour and AM/PM designa-
tion.
3. Press SET TIME again. The
display will show minutes. Use
TIME FWD or TIME BACK to set
to the current minutes.
4. Press PROGRAM RUN .
To Set the Day To Set the Day To Set the Day To Set the Day To Set the Day:
5. Press SET DAY . The display
will indicate a day of the week. Use
TIME
FWD or TIME BACK to set
to the current day of the week.
6. Press PROGRAM RUN .
To Set the Program To Set the Program To Set the Program To Set the Program To Set the Program:
7. Press SYSTEM to select HEAT HEAT HEAT HEAT HEAT
(for heating program) or COOL COOL COOL COOL COOL (for
cooling program).
8. Press PROGRAM VIEW one
time. The display will show MOR MOR MOR MOR MOR,
the settings for time and temperature
and
MON MON MON MON MON, TUE, WED, THU, FRI. TUE, WED, THU, FRI. TUE, WED, THU, FRI. TUE, WED, THU, FRI. TUE, WED, THU, FRI.