Emerson 1F92 - Manual (Page 29)

27
Programming
9. Press TIME FWD or TIME
BACK to set the time on the display
as selected in your HEATING or
COOLING SCHEDULE. Be sure
to check the AM or PM on the
display.
10.Press the red or blue
key to adjust the temperature
to match your schedule. If you want
the fan ON continuously during this
period, press
FAN .
11.Press PROGRAM VIEW one
time. MOR MOR MOR MOR MOR on the display will
change to D D D D DA A A A AY Y Y Y Y. Repeat steps 9 and
10 to enter time and temperature for
this period.
12.Press PROGRAM VIEW to
continue through the entire
schedule, entering time and
temperature for each period. When
you are satisfied that your program
matches your schedule, press
PROGRAM
RUN . Programming
is now complete for this mode and
your program is running.
13.To program the other mode,
repeat the procedure from step 6.