Speaker – Edirol R-4 User Manual
Page 37
37
Playing back
You can use the R-4’s built-in speakers to monitor the sound without having to connect headphones or
other equipment.
fig.recording-1.eps
1
Press the R-4’s
[SYSTEM]
button.
The system menu screen appears in the display.
fig.speaker-on.eps
2
Use the
[CURSOR] buttons
to choose
3 Speaker Switch
, and
press the
[ENTER] button
.
The Speaker screen appears.
* You can’t monitor via the internal speakers while recording. You’ll need to monitor through headphones. Note that
sound will not be output from the speakers if headphones are connected. If you want to use the internal speakers,
you must disconnect the headphones.
* For more about system settings, refer to
Speaker
Speaker Switch setting
Output destination
ON
Internal speakers
Line output jacks
Digital output jack
OFF
Line output jacks
Digital output jack
R-4_e.book 37 ページ ２００５年２月１０日 木曜日 午後３時３６分