Edirol R-4 - Manual (Page 40)

40
Playing back
You can repeatedly play back between two points (A-B) in the project. Simply assign points A and B during
playback, and the playback will repeat between points A and B.
fig.repeat-a
1
Play back the project.
During playback, press the [A-B REPEAT] button once. The [A-B REPEAT]
button will blink, and that location will be remembered as the starting point
(A) for repeat playback.
* If, after assigning point A , you press the STOP button before assigning point B ,
point A will be cleared.
fig.repeat-b
2
Press the [A-B REPEAT] button once again. The [A-B REPEAT] button will
change from blinking to solidly lit, and that location will be remembered as
the end point (B) for repeat playback.
fig.repeat-ab
Playback will automatically repeat between the points you specified in steps 1
and 2.
To cancel repeat playback, press the [A-B REPEAT] button when points A and
B have already been assigned. The [A-B REPEAT] button will go out, and
repeat playback will be cancelled.
Repeat playback (A-B REPEAT)
A
A B
A B
Please note
* If, after assigning point A, you press the STOP button before assigning point B, point A will be cleared.
* If the song plays all the way to the end after you’ve assigned point A, playback will repeat between point A and the
end of the song.
* If you press the [STOP] button during repeat playback, playback will stop and the repeat region (A-B) settings
will be cleared.
R-4_e.book 40 ページ ２００５年２月１０日 木曜日 午後３時３６分