Inserting and removing a card, Formatting a compactflash card, Inserting – Edirol R-4 User Manual

Page 71: Removing

Advertising
background image

71

Appendix

fig.CFslot.eps

Inserting

1

Switch off the R-4’s power.

2

Open the

[MEMORY CARD] slot

cover, and

insert the CompactFlash card with its top surface
facing upward.

Insert the CompactFlash card all the way into the
slot.

* If you attempt to forcibly insert the card in the wrong

direction, the R-4 and the CompactFlash card may be
damaged. Use caution.

3

Close the

[MEMORY CARD] slot

cover.

Removing

1

Switch off the R-4’s power.

2

Make sure that data is not being written to or read from the CompactFlash card.

3

Open the

[MEMORY CARD] slot

cover, press the eject button, and remove the CompactFlash card.

Before you use a CompactFlash card with the R-4, you’ll need to format the card. For the formatting
procedure, refer to page 68 of

“Executing HDD Utility or CF Utility commands”

(p. 68).

CompactFlash cards formatted on a device other than the R-4 may not work correctly on the R-4.
The CompactFlash card must be formatted in FAT16 format.

As an exception, you should use your Macintosh (not the R-4) to format the CompactFlash
card if you will be using the card in Mac OS 9.

Inserting and removing a card

Formatting a CompactFlash card

With the surface of the
CompactFlash card facing
upward, insert it all the way
into the slot

R-4_e.book 71 ページ 2005年2月10日 木曜日 午後3時36分

Advertising