Enterasys Networks 2E43-27 - Manual (Page 33)

Interface Device View
Gauge Control Panel
Device Views Fast Ethernet SmartSwitch Module
2-10 Management Module Guide
Gauge Type
This area allows you to select either a numeric or linear display on the Gauge
label.
Gauge Buttons
The following describes the Gauge buttons:
Applies the current settings to the Gauge label for as long as the view is open.
Saves the current settings while SpectroGRAPH is running. Settings return to
default when you restart SpectroGRAPH.
Returns the settings to the previously saved values.
Closes the Gauge Control Panel view.
Returns the settings to the SPECTRUM default.
Apply
Keep Settings
Reset
Close
Default